Showing posts with label sewing. Show all posts
Showing posts with label sewing. Show all posts

Wednesday, January 18, 2012

DIY Toddler Bib

Jaden has entered his terrible terrific two-year-old stage. This means that he is beginning to assert his independence by voicing his own opinions. One thing he particularly insists upon is feeding himself. I am not allowed to help him. At all. Not even by cutting up his food into bite-sized peices. (In his opinion, a full sized Snickers bar is bite-sized, not the tiny actually bite-sized peices). He won't even allow me to help him eat hard to spear with a fork foods. As you can imagine, meal times have become very very messy. Messy meals are a problem when you only have two toddler-sized bibs....I mean bibs big enough to handle toddler-sized messes....especially when those two bibs are Halloween and Thanksgiving themed and those holidays are long since over. The solution? Make more bibs. Like this.

Gather your supplies. You will need:
*A bib that currently fits your toddler
*Fabric for the front and back of the bib
     For the front of my bibs, I used 3 fat quarters from Robert Kaufman's Airplanes, trains, and cars collection. The colors and designs are darling and totally boy, plus the fabric is 100% organic cotton (so be sure you wash it before you cut and sew it). I used plain white cotton flannel for the back of my bibs.
*Newspaper or other large sheet of paper
*Velcro
*Scissors, matching thread, pins, a pencil, and a sewing machine.




Since I didn't have a pattern for a bib, I made my own simply by tracing the Halloween one I already had onto a page from the newspaper. When you trace your bib, be sure that you add 1/4 of an inch to the outside edges of the bib so that you have a seam allowance when you go to sew it together. If you forget to add the seam allowance, your bib may turn out smaller than you want.



After your pattern is made, pin it to your fabric and cut it out.

Cutting out the back and the front




You can probably cut the back and the front out at the same time if you want to. I cut them separately when I made my first bib. Since I was making three bibs in one day, I found it faster to cut everything out at the same time & didn't notice that it made much of a difference in the size or pattern of each peice.

Before you put the right sides of the front and back peices together, you need to pin the velcro on. It will go in the upper right hand corner on the right side of each peice.

This is where the velcro should be when you're finished.

I had to use two strips of velcro to get the width I wanted. There was a very limited selection at my local hobby store. I will try harder to find wider velcro in the future. This works in a pinch, though.


After you have your velcro pinned where it belongs you can put the right sides of the front and back peices together, pin them in place, and then sew. Make sure you leave 2" opening along the bottom edge so you can turn your bib right side out.




Use a 1/4 inch seam allowance. Measure where that would be on your sewing machine and align your fabric accordingly. I always have to do this because I am a ditz and forget which markings on my machine are for which allowances. Silly moi, I know.


REMEMBER (as in DON'T FORGET) to leave an opening on the bottom edge so that you can turn your work right side out. I mark my opening with two pins side by side on each side of the opening I want to leave so that I remember not to forget to leave a whole.

After you've sewn around the edges of your bib, trim the curve around the neck and the corners, and then turn it right side out. Press the bib flat.


What about that opening? It is easy to deal with. My preferred method is to fold the fabric under 1/4 of an inch and iron it flat, making sure that the edges of the opening line up with the sewn edges of the rest of the bottom edge. I close the opening when I topstitch around the whole bib....which is the next step.

After you've ironed the opening in the bottom edge, topstitch as close to the edge as possible around the entire bib. This will look great and make sure that you've got that opening closed.

Here is the finished product.









Thursday, September 15, 2011

Lovin Me Some Minky

It was love at first touch, me and minky. I was at a quiltig shop in Orem, looking for inspiration for J's first baby blanket. The moment I laid my fingertips on it I fell for the incredible softness & wished I could just cuddle with it all night long. I could just imagine snuggling a sweet baby in softness and being in love with both my little lamb and the blanket. So I made lots of minky blankets.






I know, 4 is not equivalent to tons and bunches, or even lots. But I have plans to make more. Oh do I ever. And to take better pictures of them. My particular favorites are the pink damask and the dinosaur ones. The prints are flannel and the backs are minky - extra specially cuddly! Another one of the best things about minky blankets is that they are warm and lightweight without being bulky. Perfect for keeping little ones cozy this fall and winter.

Friday, September 9, 2011

Sneak Peek

I am currently obsessed with two things. The first is reading waaaaay too many blogs. The second is completing my current project. Here is what my sewing desk looks like at the moment.



Any guesses as to what I'm making?




Thursday, September 8, 2011

Baby Burpie Tutorial (Posh Burpies!)

My babies spit up. A lot. Both S & J were born with acid reflux. Each went through several outfits daily. Not to mention burp cloths! We had an entire section of the diaper bag reserved for burpies, and I made sure never to leave the house without a minimum of three!

I've decided that being a mom doesn't mean you have to be frumpy. This means that burp cloths don't have to be drab. This is a tutorial on how you can make fabulous, stylish, functional burpies for your baby.



Here's what you need to make super cute burpies:
Fabulous Fabric
Matching chenille fabric
Basic sewing stuff (self healing cutting mat, large quilting ruler, rotary cutter, matching thread, a sewing maching, some pins, and scissors)


I used Michael Miller's flannel Dandy Damask in Cotton Candy and a Michael Miller flannel dot also in Cotton Candy, and white chenille for the back. I order my chenille from fabric.com. It usually comes in 58" wide yards.

~ You can make these using fat quarters, or you can cut the fronts and backs out of larger amounts of fabric. The bonus of fat quarters? No measuring or cutting! sweet. ~

Here's how you make them:

Cut out a rectangle 14" wide by 20" long of your fabulous fabric & another one the same size out of your chenille.

Here are some cutting diagrams. I drew them in Paint. Since I am not a drawing kind of artist, they are probably way off scale, but they will give you an idea of how you can get the most burpies out of a yard of fabric.


Once you have your fronts and backs cut out, pin the two rectangles right sides together & sew around the edges using a 1/2" seam allowance. Make sure to leave an opening to turn it right side out.

Turn your burpie right side out. Fold up the edges of the hole & sew the opening shut.

Top stitch around the entire burpie 1/4" in from the edge. Top stitch again 1/2" in from the edge. Your two rows of topstitching will be 1/4" apart. Topstitching twice gives the burpie a nice finish and improves the durability.

Voila! You've done it!



Saturday, July 23, 2011

Tie Tee Shirts



Isn't that little kid super cute? Yeah. I made him. Isn't the little tie shirt he's wearing cute? Yeah, I made that too. ;)

When Jaden was little, I made him a few tie onesies. I found several applique tutorials online, created my own tie template, and went to town! He grew out of them, and I forgot to make new ones. Ok ok, I didn't forget. I just didn't like my tie template. I am not good at drawing. At all. Anyhow, one day I was looking through my forever long list of saved to-do projects, searching for one to get done and cross off. I came across this tie tee tutorial from Saltwater Kids. There is a picture of a big-kid tie tee and a little-kid tie tee & I was inspired to make one for Spencer and Jaden. I thrifted a white shirt for Spencer's, but couldn't find a suitable shirt for Jaden's. So I made his using a tee from a package of Hane's white tee's I bought at Target. The smallest size they had was 2T, so I guess he'll be wearing it for a while. Good thing it's cute!!